PLEASE SELECT THE DESTINATION COUNTRY AND LANGUAGE :
Price | |
---|---|
Discounted Price | Php 40,000.00 |
Discounted Amount | Total Discounted Amount KRW (Mobile Purchase Discount KRW ) |
Reward Points |
Points :400.00(1.00%) KRW % KRW % KRW % KRW % KRW % KRW % KRW % KRW % KRW % |
Shipping Method | Selected by customer |
Shipping Cost | International Shipping Fee |
Description |
Shipping | |
---|---|
Quantity |
Product Info | Product | Remove |
---|---|---|
Total(Qty) 0 |
JBL CONTROL 50PK
with 1 Subwoofer+ 4 Satellite (1 set)
Overview
Packaged Surface-Mount Subwoofer-Satellite
Loudspeaker System
The Control 50 Series subwoofer-satellite loudspeaker system provides high fidelity sound in restaurants, retail stores, music cafes, health clubs, theme bars, leisure venues, or any location where full-range high fidelity foreground/background music is required from surfacemount system.
Control 52 Satellite Speaker
The stylish Control 52 satellite loudspeaker produces superb high fidelity sound via a lowdistortion 60 mm (2½ in) driver, which features a secondary bucking magnet for high efficiency, rubber half roll surround for enhanced bass performance, 19 mm (0.75 in) copper clad aluminum wire voice coil on a vented Nomex® former for high fidelity and reliability, and a copper-capped pole piece for more consistent impedance and extended high frequency response. The wall bracket allows each speaker to be angled up to 45° off-axis.
Control 50 Subwoofer
The 150 Watt (600 Watt peak) Control 50S/T subwoofer contains a high-power, long-excursion, 200 mm (8 inch) driver which features an extremely robust high-mass cone for extended low frequency response, a 38 mm (1.5 in) 4-layer copper voice coil for high motor strength, an aluminum former for good transient response, and a rubber half roll surround for enhanced bass performance. The Control 50S/T’s included two-piece easy-mount wall-bracket installs quickly: The multi-point wall portion of the bracket attached to the wall and the self-guiding speaker-mounted bracket drops into place for a secure attachment. A cover over the Control 50S/T terminal cup keeps wiring neat. The Control 50S/T is mono. The crossover network built into the subwoofer provides proper signal routing and four satellite output connectors allow connection of the wires for the four Control 52 satellite loudspeakers. A Loop Out connector is also provided on the subwoofer for looping the full-range input signal to other loudspeakers or to other subwoofer/satellite systems.
System Configuration
Available as packaged system or as separate items, the Control 50 Series is extremely versatile system. The C50PACK system contains four Control 52 satellite speakers and one Control 50S/T subwoofer as an easy predesigned system. For smaller floor spaces, the Control 50S/T subwoofer can be utilized with two Control 52 satellite speakers. The Control 50 system is mono. Both the Control 50S/T and Control 52 can be intermixed in systems along with the Control 40 Series in-ceiling models – Control 40CS/T subwoofer and Control 42 satellite speaker – to match the form factor requirements of a wide variety of applications.
Features
Versatile four satellite speaker system
Stylish, unobtrusive design fits into a wide variety of decor
High fidelity sound
Selectable 70V/100V for distributed lines, or low impedance
Wall-mount brackets include
Available in black or white
Specifications:
Control 50
Subwoofer-Satellite System Specifications
Frequency
Range (-10 dB)1: -----------------------32 Hz – 20 kHz
Frequency
Response (±3 dB) 1 : ----------------------- 50 Hz – 17 kHz
Power
Capacity2: -----------------------200 Watts Continuous Program Power (100 hrs)
-----------------------
100 Watts Continuous Pink Noise (100 hrs)
Nominal
Sensitivity (2.83V, 1m)1: -----------------------87 dB with 4 satellites
----------------------- 85 dB with 2 satellites (subwoofer center of
wall, higher sensitivity depending on subwoofer boundary loading, see
application note).
Nominal
Impedance: -----------------------4 ohms (in bypass/thru mode) with 4
satellites
----------------------- 8 ohms (in bypass/thru
mode) with 2 satellites
Transformer Taps: ----------------------- 80W, 40W, 20W, (& 10W @ 70V), plus bypass/thru (listed as 8 on switch to indicate subwoofer impedance).
Control 50S/T
Specifications
Frequency
Range (-10 dB)1 : ----------------------- 32 Hz – 200 Hz
Frequency
Response (±3 dB)1: -----------------------50 Hz – 150 Hz
Power Capacity2:
·
300
Watts Continuous Program Power (2 hrs)
·
150
Watts Continuous Pink Noise (2 hrs)
·
200
Watts Continuous Program Power (100 hrs)
·
100
Watts Continuous Pink Noise (100 hrs)
Nominal
Sensitivity (2.83V, 1m)1 : -----------------------95 dB (near corner), 89 dB
(center of wall)
Rated
Maximum SPL (1m): ----------------------- 115 dB average, 121 dB peak (near
corner) 109 dB average, 115 dB peak (center of wall)
Nominal
Impedance: -----------------------8 ohms (in bypass/thru mode)
Transformer
Taps: ----------------------- 80W, 40W, 20W, (& 10W @ 70V), 8 ohm
bypass/thru
Transducer:
Driver:
----------------------- 200 mm (8 in) with polypropylene cone, butyl rubber
surround, 38 mm (1.5 in) 4-layer copper-clad coil, vented aluminum Former.
Enclosure:
Input
Connectors: ----------------------- Six removable locking 2-pin connectors with
screw-down terminals. Max wire 12 AWG (2.5 mm2)
Material:
----------------------- Top, bottom, front & bottom: Structural plywood.
Port & terminal panels: MDF. Grille: -----------------------Painted
zinc-plated metal.
Dimensions
(H x W x D): -----------------------Cabinet: 356 x 391 x 203 mm (14.0 x 15.4 x
8.0 in)
Wall
Bracket: -----------------------15 mm (0.6 in) deep
Wall
Bracket: ----------------------- 2.3 mm (0.9 in) thick zinc-plated and painted
cold-rolled steel
Net
Weight: -----------------------9.0 kg (20 lbs)
Shipping
Weight: ----------------------- 10.2 kg (23 lbs)
Included Accessories: -----------------------Wall bracket (both speaker and wall parts) with 4 pc
Control 52 Specifications
Frequency
Range (-10 dB)1: -----------------------140 Hz – 20 kHz
Frequency
Response (±3 dB)1: -----------------------180 Hz – 17 kHz
Power
Capacity2
·
50 Watts Continuous Program Power (2 hrs)
·
25
Watts Continuous Pink Noise (2 hrs)
·
30
Watts Continuous Program Power (100 hrs)
·
15
Watts Continuous Pink Noise (100 hrs)
Nominal
Sensitivity1-----------------------: 85 dB (4.0V/1m = 1W) 82 dB (2.83V, 1m)
Nominal
Coverage Angle3-----------------------: 150° x 150° (omnidirectional)
Rated
Maximum SPL (1m): ----------------------- 94 dB average, 100 dB peak
Nominal
Impedance: ----------------------- 16 ohms
Transducer:
Driver:
-----------------------60 mm (2.5 in) with polypropylene cone, butyl rubber
surround, 19 mm (0.75 in) copper-clad coil, vented Nomex® former, secondary
bucking magnet, and copper sleeved pole piece for high frequency extension.
Enclosure:
Input
Connector: Removable locking 2-pin connector with screw-down terminals. Max
wire 12 AWG (2.5 mm2)
Material:
-----------------------High impact polystyrene, painted zinc-plated metal
grille.
Dimensions
(H x W x D): Cabinet: ----------------------- 115 x 84 x 96 mm (4.5 x 3.3 x
3.75 in)
Wall
bracket: -----------------------51 mm (2.0 in)
Net
Weight: ----------------------- 0.7 kg (1.5 lbs)
Shipping
Weight: ----------------------- 0.8 kg (1.8 lbs)
Included Accessories: -----------------------Wall bracket (both speaker and wall parts), 2-pin locking connector
Product Name | CONTROL 50PK |
---|---|
Brand | JBL |
Sale Price | Php 40,000.00 |
Mileage | Points :400.00 |
수량 | |
Product Code | P0000JOZ |
Product Details | Portable PA System with 1 Subwoofer+ 4 Satellite (1 set) |
QR Code |
The Eight Basic Consumer Rights : http://www.dti.gov.ph/dti/index.php?p=720